Commercial Structured Cabling · Operated by DataTel 360 · Serving Businesses Since 1998
Call 770-441-9999
Commercial Data Cabling • Atlanta & the Southeast
Commercial Data Cabling Contractors
Atlanta-Based. Nationwide Project Support.
Cat6•Cat6A•Fiber Optics•Business Wi-Fi•MDF/IDF•New Construction
Commercial network infrastructure for offices, warehouses, distribution centers and new construction — installed and managed by an Atlanta-based contractor serving Georgia and the Southeast, with project support available in other markets.
Call 770-441-9999Commercial Network Infrastructure
A commercial cabling contractor built for real project work.
Data Cabling Contractors installs the physical network infrastructure commercial buildings run on: copper, fiber, pathways, network rooms and wireless cabling — installed, tested, labeled and documented.
We work for businesses, general contractors, IT departments, managed service providers, property managers and national technology companies. Projects range from a handful of new drops in an occupied office to full low-voltage infrastructure for a new building, plus technology site surveys and field support when a project sits outside our core service area.
Commercial Cabling Services
What we install, test and document.
Every service is delivered under a written scope with labeling, testing and closeout documentation.
Structured Cabling
Complete commercial cabling systems — cable, pathways, patch panels, termination and labeling — installed to one documented standard.
Ask us about thisCat6 & Cat6A Cabling
Gigabit Cat6 for workstations and 10-gigabit Cat6A for access points and high-bandwidth areas, terminated and tested drop by drop.
Ask us about thisFiber Optic Installation & Repair
Single-mode and multimode backbones, fusion splicing, LC/SC termination, OTDR testing and emergency fiber repair.
Ask us about thisBusiness Wi-Fi Infrastructure
Access point cabling, mounting and PoE infrastructure placed where the coverage design says it belongs — including high-bay locations.
Ask us about thisMDF & IDF Buildouts
Network rooms built or cleaned up — racks, cabinets, patch panels, ladder rack, cable management and backbone terminations, fully labeled.
Ask us about thisTechnology Site Surveys
An on-site assessment before anyone quotes a number: MDF and IDF conditions, existing cabling, available pathways, ceiling and wall construction, cable distances, rack and power requirements, access point locations — documented with photos and measurements.
Ask us about thisCommercial Environments
High-bay, lift work and long pathway runs.
Warehouses, distribution centers and manufacturing plants are a different job from an office floor — 30-foot mounting heights, cable routed around racking and conveyors, and access points placed where the coverage design says they belong. We plan the lift and the pathway before the crew arrives.
- Warehouses & distribution centers
- Manufacturing facilities
- Corporate & professional offices
- Retail & restaurants
- Healthcare facilities
- New construction & buildouts
Coverage
Atlanta Field Strength. Nationwide Project Support.
Two different things, and we are precise about which is which.
Atlanta & the Southeast — our own crews
Metro Atlanta and much of the Southeast are covered by our core field team. This is where site surveys happen fastest and where we work commercial buildings week in, week out.
Outside the Southeast — project support
Beyond our core region we work with qualified field technicians and installation partners who follow our written scope, while scheduling, documentation and reporting stay with our Atlanta project team. This allows us to support customers who need cabling, technology site surveys, smart hands or field services outside our core Southeast service area. Availability depends on the location, size and scope of the project.
Direct regional field experience
Metro Atlanta service area
Counties we work in regularly: Fulton, DeKalb, Cobb, Gwinnett, Cherokee, Forsyth, Clayton, Henry, Douglas, Fayette, Coweta and Paulding. Outside metro Atlanta we cover the rest of Georgia and the Southeast from the same Atlanta project team.
- Atlanta home base — project management and our core field team
- Southeast — direct field capability across GA, AL, TN, NC, SC and FL
- Other markets — project support through qualified field technicians and installation partners, subject to location and scope
Why Businesses Choose Us
Six reasons commercial customers call us back.
Serving Businesses Since 1998
Operated by DataTel 360, an Atlanta commercial technology contractor with more than 25 years of field experience.
Commercial Projects Only
No residential work. Crews, tooling and scheduling are built for offices, warehouses and active commercial facilities.
Atlanta & Southeast Field Strength
Our own team covers metro Atlanta and much of the Southeast, so surveys and urgent work move quickly.
Experienced Project Management
One accountable project manager from scope through closeout — scheduling, site access, trade coordination, change requests and documentation handled by people who have run commercial jobs since 1998.
Written Scopes & Documentation
Cable types, counts, pathways and testing defined up front; labels, test results and closeout reports delivered at the end.
Copper + Fiber Expertise
Cat6 and Cat6A through single-mode fiber backbones, fusion splicing and OTDR testing — one contractor for both.
The Company Behind the Brand
Backed by DataTel 360
Commercial Technology Infrastructure Since 1998
Data Cabling Contractors is operated by DataTel 360, an established commercial technology contractor serving businesses since 1998. The crews, project managers and field standards behind every quote come from a company that has been installing technology infrastructure in commercial buildings across the Atlanta market for more than two decades.
- Serving Businesses Since 1998
- Atlanta-Based
- Commercial Infrastructure Specialists
- Nationwide Project Support Available
Have a cabling project coming up?
Send us the location, approximate drop count and timeline. We’ll tell you what we need next.
How It Works
Three steps from first call to closeout.
- 1
Scope & Survey
Send drawings, photos or a drop count. We review the details, ask the questions a cabling contractor should ask, and survey the site when the project calls for it.
- 2
Written Quote
You receive a written scope: cable types, counts, pathways, network rooms, testing and documentation — so every bid you compare covers the same work.
- 3
Install, Test & Document
We install around your schedule, then terminate, label, test and hand over documentation your IT team can actually use.
New Construction & Tenant Buildouts
Cabling planned before the walls close.
On new construction the expensive mistakes are made on paper, not on install day. We review the architectural and electrical drawings early, work out the cable counts, and get the pathways, sleeves, core drills and network-room space onto the plan while it is still cheap to change.
- Plan and drawing review with cable counts by area
- Pathway design — tray, conduit, sleeves and core locations
- MDF and IDF planning: room size, power, cooling, rack layout
- Backbone and horizontal distance checks before rough-in
- Rough-in phased with the GC, electrical and ceiling trades
- Trim-out, testing, labeling and closeout ahead of turnover
Planning a New Buildout?
Send us the drawings — floor plans, reflected ceiling plans, an electrical set or even a marked-up PDF. We will come back with the questions a cabling contractor should be asking at this stage.
Project Experience
The commercial work we’re called in for.
Four project types that make up most of our schedule, in the environments where commercial cabling actually gets difficult.
Warehouse Network Infrastructure
Cat6 and Cat6A to pick stations and offices, fiber between network rooms, and access point drops at 25–40 ft installed from lifts around live racking and conveyors.
Office Structured Cabling
Workstation and conference room drops, printer and AP cabling, terminated to labeled patch panels — scheduled around a business that has to keep working.
Fiber Backbone
Single-mode and multimode runs linking MDF to IDF or building to building — spliced, terminated into enclosures and tested, with results handed over at closeout.
New Construction & Buildouts
Plan review, cable counts, pathway and sleeve coordination and MDF/IDF layout ahead of rough-in — then rough-in before the ceilings close and trim-out before turnover, phased with the general contractor and electrical trades.
Resources
Commercial cabling & network infrastructure resources.
Reference material on the questions that come up before a cabling project starts — drop counts, fiber types, network rooms, testing and construction scheduling.
Structured Cabling
Office Drop Planning
Working out how many network drops an office floor needs, and where they belong, before the cable order is placed.
Read the resourceWarehouses & Industrial
Warehouse Backbone
What a fiber backbone has to carry in a warehouse or distribution center, and how the runs between network rooms get planned.
Read the resourceNew Construction
Construction Rough-In
Where low-voltage rough-in sits in a commercial construction schedule, and what has to be decided before the ceilings close.
Read the resourceFAQ
Commercial cabling questions, answered.
Can you support projects outside Atlanta and the Southeast?
What is the difference between Cat6 and Cat6A?
Do you handle large warehouse and distribution center projects?
Do you provide cable testing and documentation?
Can you work after hours or in an occupied building?
Do you work with general contractors on new construction?
Which areas around Atlanta do you cover?
What do you need to quote a cabling project?
Request a Quote
Tell us what you’re building.
A few fields to start. We follow up for the technical detail once we understand the project.
- Serving businesses since 1998
- Commercial projects only
- One accountable project contact
- Your information is never sold
Prefer to talk? Call 770-441-9999
Email sales@datatel360.com
One more step — press Send
Your email app should have opened with the details filled in. Your request is not sent until you send it. Attach any drawings or photos first, then press Send.
If nothing opened, use the copy button below and paste it into an email — that works everywhere.
Project Reference:
Keep this with any files you send us.
Prefer to talk? Call 770-441-9999
Ready to discuss your cabling project?
Whether you need 20 Cat6 drops in an Atlanta office, a warehouse fiber backbone, a commercial site survey or experienced field support in another market, tell us what you’re building and where you need support.
Commercial ProjectsAtlanta & Southeast Field StrengthNationwide Project SupportServing Businesses Since 1998
Planning a Commercial Cabling Project?
From commercial cabling projects in Atlanta and the Southeast to site surveys and field support across the United States, Data Cabling Contractors provides experienced infrastructure professionals for Cat6, Cat6A, fiber optics, business Wi-Fi and network-room projects.
770-441-9999